Question:
I am installing the BrakeRite plug and play EOH system. The battery harness has me confused. There are two sets of black and white leads with spade terminals. Obviously one set goes to my break away battery. What is the other set for??? Thanks
asked by: Patrick W
Expert Reply:
On the Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit # T4813102 there are 3 wire connections coming from the Titan Actuator. The first is a 3 prong female connector that will connect with the 7-way harness. Second is the 2 prong female that will breakaway battery. And finally a 2 prong male that will connect with the brake away switch.
The battery harness will have 2 sets of spade terminals for applications that require 2 breakaway batteries. This can be seen in the instructions(linked below) when wiring for the SD and RF applications. You will only require the one battery connection for your application. So you will need to seal off the other set of connections to ensure that you don't have a wiring short.
Dexter BrakeRite II Plug and Play Electric-Hydraulic Actuator Kit - 1500 psi
