Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer  

The Easy Grease Trailer Idler Hub Assembly for 3.5K Axles part #AKIHUB-545-35-G-EZ-K is a direct replacement for a UFP H-1377.

First, it does sound like, based on the measurement and information you have provided, that race #L68110, is correct since its outer diameter is 2.327 inches. This race is associated with bearing #L68149 which has an inner diameter of 1.378 inches…

I can help you pick out the correct hub, but we don't have a cross-reference part number for the one you listed. In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first…

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

From my research, the correct replacement for the UFP HD1377 hub/drum is the Trailer Hub and Drum Assembly part #AKHD-545-35-K or the Dexter 5 on 4-1/2 Complete Hub-and-Drum Assembly part #84546UC3. These hub/drums both use a L68149 (1.378"…

In order to determine which hubs will work on your 2004-2005 Karavan jetski trailer you will need to know the axle capacity, bolt pattern and the number on the bearings that are inside your current hub. I've found some similar trailers in my…

Trailer hubs have two bearings, one is referred to as the inner bearing, closer to the trailer. The outer bearing is the one furthest from the trailer. If we have both of these bearing numbers we can identify which spindle or hub is needed. So far…

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

Your 2017 Keystone Raptor 5W Toy Hauler will need the following parts to replace the trailer brakes on this axle. First, you need the brakes. The brakes that are compatible with your axle are the Electric Trailer Brake Kit - 10" - Left and Right…

If you remove the hub and wipe away the grease on the spindle you can check to see if it is damaged. Look for an scarring, gouges, discoloration, or scoring on the spindle. If the spindle is damaged then the bearings won't ride properly and can…

Based on information I was able to find online it looks like your Meher 3,750lb axle uses the same Bearing Kit #BK2-100 as a standard 3,500lb axle. Depending on your exact bolt pattern it may be better to carry a spare Hub #CE13511 as this is much…