Is It Normal For No Lights To Appear On Draw-Tite Activator IV 5504 When No Trailer Is Connected?
Question:
2021 Ford E450 cutaway Unless a trailer is hooked up to the tow vehicle I will see no lights at all on the Draw-tite 5504 brake controller, is this correct? Or, am I supposed to see a red dot when no trailer is hooked up? I installed the controller with no trailer and have nothing lit up. It does have power to the controller. Thank you!
asked by: Rory H
0
Expert Reply:
When there is not trailer connected to your 2021 Ford E-450 Cutaway there should be no lights on the Draw-Tite Activator IV 5504 lit up, so your controller is performing correctly.
As soon as it detects a trailer is connected you will get the red decimal.
I included a video of the 5504 for you to take a look at.
expert reply by:
Samuel C
0
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Trailer Wiring Diagrams
- Q&A: How to Test Brake Controller without Trailer Connected
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: All Parts Needed to Flat Tow 2014 Chevy Silverado 1500 Behind Motorhome
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: How to Troubleshoot Your RV Air Conditioner
- Q&A: Troubleshooting Right Side Trailer Lights Not Working, Left Side Working Correctly
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated