bing tracking image
Q & A Icon

Replacement Underbed Gooseneck Hitch For 2007 Ford F-250 With 6-3/4' Bed Length

Question:

I have a 2007 F250 standard 6.5 foot bed. purchased used and the gooseneck hitch was removed. My Center Hole is 46 inches from the rear of the bed. What model will work with the 4 inch hole drilled 46 inches on center from rear of truck bed.

0

Expert Reply:

It looks like the Curt Double Lock, Flip and Store Underbed Gooseneck Hitch # C60720 is the correct hitch for your 2007 Ford F-250 with the 82.8" bed length. Per the installation instructions linked below the hole needs to be cut out at 37" from the front cab side of the bed. This will equal the same measurement as the 46" center from the rear of the bed. This also uses a 4" diameter hole for the gooseneck ball.

The Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness # 41157 can be used to install a 7-way blade trailer connector inside your truck bed if that was also removed or the previous owner never installed one. This will ensure that your wiring is not dragging across your tailgate risking damage to both the trucks paint and the wiring inside the harness.

expert reply by:
0
Gregory M

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>