Thule HideAway Awning For 2021 Ford Transit 250 With Medium Height Roof

Question

Question:

To install the Thule 490011 awning on the roof of my 2021 Ford Transit 250 medium roof, do I need additional mounting hardware or does the awning come with all the necessary installation hardware?

asked by: Erik C

1

Helpful Expert Reply:

You will not need additional hardware to install the Thule # TH490011 awning on your 2021 Ford Transit with a medium height roof. These kits are for high roofs. I have attached a link to the installation instructions below.

expert reply by: Les D

1

Answer 1

You will be able to easily remove the Thule HideAway Awning #TH490011 from the mounting brackets that come with the direct mounting kit, but it should be noted that this awning only sticks out 3-1/2" from the side of your R-Pod trailer. I've…

view full answer...

Answer 2

If you're wanting to mount the Thule HideAway Awning #TH490011 on the wall of your 2015 Ford Transit T350 High Roof you will need to get this adapter #TH307999

view full answer...

Answer 3

We have what you are looking for. As long as you have some space to mount the base plate, you can use the Thule HideAway Awning Adapter for Mercedes Sprinter with OE Track #TH301668 to connect the Thule HideAway Awning for ProMaster or Sprinter -…

view full answer...

Answer 4

The correct Thule Hideaway Awning for a wall mount application would be the part #TH490011 as the part #TH490008 was designed to attach to the crossbars of a roof rack. Both of these come with all needed brackets for their applications.

view full answer...

Answer 5

The Thule Hideaway that mounts to roof racks part #TH490008 is designed to attach to a set of crossbars and comes with hardware to do so whereas the Thule Hideaway wall mount #TH490011 comes with hardware to attach to the side of a wall. So the…

view full answer...

Answer 6

The Thule HideAway Awning part #TH490011 offers direct mount installation. Therefore, you'd need to attach the brackets directly to the wall of the trailer. If you have existing brackets, these would need to be removed. I have attached for you…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Thule HideAway Awning For 2021 Ford Transit 250 With Medium Height Roof

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching