9 inch SnapPad that Fits 2021 Jayco Eagle HT  

The SnapPad XTRA Jack Pads for Lippert Leveling Systems part #SP54FR4 are the exact same as the Replacement Pads for SnapPad Jack Stand Pad System part #SN78FR. The latter part is actually just a replacement for the former which is offered in a few…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The newer Chevrolet and GM pickup trucks have a known power deficiency issue with the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras #FCE48TASL-05. There is likely nothing wrong that you did, the problem is the…

SumoSprings has to carefully word how much addition support their kits like the #SSA43 and #SSA42 provide since they don't want people to think they will be gaining additional suspension capacity when that's not what these kits are designed…

Thanks for reaching out and providing the photos, Ana! To replace the Lippert foot pad on your 2021 Grand Design Momentum 376THS you need the Lippert 5th Wheel RV Landing Gear Foot Pad Kit - 9" Round #LC314667. This comes with 2 of the pads so…

I recommend measuring the feet on your leveling system and noting the shape of the pad. That said, it should be 9" round pads and in which case you would use the SnapPad XTRA Jack Pads for Lippert Leveling Systems part #SP54FR4. If you have a…

Hey TJ, I went out and opened up one of the Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System #LC324269 boxes and found that they include a 5/8-18 x 1-1/2" fine thread grade five bolt. I then called Lippert and they…

Thanks for reaching out and providing a photo and measurements, Gary! The SnapPad kit you need for your 5-3/4" square foot pads are the SnapPad XTRA Square 6 Jack Pads for Lippert Leveling Systems w/ 6" Square Jack Feet #SN99FR. This is a…

The Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System - 10,000lbs #LC672136 has 9" round feet so you would need the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 4 #SP54FR4.

Josh, the bolt for the Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System #LC324269 is 7/16" x 1/2" and needs to be torqued to 132 ft.-lbs.