Does Swing Out Extension Bracket LC182496 Fit HappiJac Swing-Out Extender Bracket # HJ54FR

Question

Question:

Will extender HJ54FR attach to LC182496 ? I’m trying to get the most extension possible to fit around my 2018 Ram Dually

asked by: Jerry N

1

Helpful Expert Reply:

Yes the Swing Out Extension Brackets # LC182496 does fit the HappiJac Swing-Out Extender Bracket # HJ54FR.

expert reply by: Jameson C

1

Answer 1

Hey Jonathan, it's odd but the Happijac Extender Bracket part #HJ54FR does not come with mounting hardware. You'd basically need to take the current hardware from your setup to a hardware store so you can get a duplicate bolt and nut so that…

view full answer...

Answer 2

If you're looking for just the L-bracket for your HappiJac Electric Truck Camper Jack System #LC736514-ELKIT then you'll need part #LC182492. The flat bracket can be swapped out with part #LC182494 and the swing brackets can be replaced with…

view full answer...

Answer 3

The mounting holes of the Swing Out Extension Brackets part #LC182496 that you referenced are for the side that attaches to the jack itself and not the portion that attaches to the camper. You'd need to attach these to the L-bracket on the camper…

view full answer...

Answer 4

With dually trucks I recommend the Swing Out Extension Brackets #LC182496 with the HappiJac Manual Truck Camper Jack System #LC736515-4. This is due to the Brophy Heavy Duty Cable Camper Jacks #CX74 having to sit under the lip of the camper. Since…

view full answer...

Answer 5

The HappiJac Swing-Out Extender Bracket for Dual Wheel Chassis Truck Camper Jacks #HJ54FR (single) or Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems #LC182496 (double) are not compatible with the Atwood electric camper jacks.…

view full answer...

Answer 6

I contacted the Rep at Happijac to inquire on your question of the HappiJac Swing-Out Extender Bracket for Dual Wheel Chassis Truck Camper Jacks, #HJ54FR. His response was that yes, you can "stack" the extensions. There is however a point…

view full answer...

Answer 7

There are camper jacks that will allow you to take your camper off your truck bed easily, but there is nothing with wheels as that would not be stable enough so they do need to remain stationary. To choose the right camper jacks, you need to know the…

view full answer...

Answer 8

I contacted Brophy and the Brophy Heavy Duty Cable Camper Jacks part #CX74 are designed to be used on a solid flat surface preferably concrete. Your concerns are valid that the camper may slide off if the ground is unstable. They do not recommend…

view full answer...

Answer 9

The HappiJac Swing-Out Extender Bracket #HJ54FR that you referenced is sold individually.

view full answer...

Answer 10

I may have a solution for you, but we don't carry any true pneumatic wheels for swiveling trailer jacks-they're typically only going to be used on heavy duty trailer jacks and dollies like the Trailer Valet #STC-V211. With that said, you may…

view full answer...

Answer 11

The length of the HappiJack Swing-Out Extender Bracket #HJ54FR is 16 inches, the width is 5 inches, and the distance between the mounting holes is 7-1/2 inches. I went ahead and attached a diagram of the dimensions to this question as well as a video…

view full answer...

Answer 12

If one set of the HappiJac Extender Brackets part #HJ54FR doesn't provide enough clearance Happijac has told us that you can use a second set to gain additional clearance.

view full answer...

Does Swing Out Extension Bracket LC182496 Fit HappiJac Swing-Out Extender Bracket # HJ54FR

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching