Recommended Lock N Roll Ball Mount For 2019 Yukon XL SLT That Needs 3-1/4 - 3-1/2 Rise/Drop
Question:
I have a 2019 Yukon XL SLT with the Maxtowing package that has rear auto-leveling shocks. It needs approximately 3.25 ball hitch setup to get my trailer level when I tow. Does any of the adjustable Lock N Roll hitch setups offer a 3.25 inch or 3.5 inch configuration? Thanks
asked by: FT
Expert Reply:
All of the Lock N Roll Articulating Hitch Ball Mounts have adjustment holes that are 2" apart center to center, so you will only be able to get rise or drop in a 2" increments.
Since you are looking for 3-1/4" - 3-1/2" rise or drop to level your 2019 GMC Yukon XL SLT with the Max Towing Package then I recommend the Lock N Roll Articulating Hitch w/ 3-Position Channel - 2" Receivers - Vehicle Side - 11K # 336VS503505 which offers up to 4-1/4" rise or drop.
Since it won't be the exact measurement you mentioned, I would adjust the ball mount to the lightly higher setting of 4-1/4" if you are needing a drop, or 2-1/4" if you are needing a rise since even though you have auto leveling shocks, you will still get a minor amount of squatting.
I included a video of the # 336VS503505 for you to take a look at.
Products Referenced in This Question
Lock N Roll Articulating Hitch w/ 3-Position Channel - 2" Receivers - Vehicle Side - 11K
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- No Ball
- Steel Shank - Matte Black
- Drop - 4 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 11000 lbs GTW
- Class IV
- Off Road Coupler
- Lock N Roll
more information >
Product Page this Question was Asked From
Lock N Roll Articulating Hitch w/ 5-Position Channel - 2" Receivers - Vehicle Side - 11K
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- No Ball
- Steel Shank - Matte Black
- Drop - 8 Inch
- Rise - 8 Inch
- Fits 2 Inch Hitch
- 11000 lbs GTW
- Class IV
- Off Road Coupler
- Lock N Roll
more information >
Continue Researching
- Q&A: Choosing the Correct Rise/Drop for Lock N Roll Articulating Hitch
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Can Lock N Roll Articulating Hitch be Used in Rise Position
- Q&A: Solutions To Correct Porpoising and Sag On 2020 Toyota Tacoma 4WD Towing Popup Camper
- Q&A: How to Manually Move an 8,000 Pound Trailer
- Q&A: Lock N Roll Articulating Coupler Bolt Torque Specs
- Q&A: How to Fix Trailer That Is Still Sagging In Front After Using Adapter
- Q&A: Can Weight Distribution Hitch Be Used With Cruisemaster DO35
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: How to Choose a High-Low Adapter
- Article: Tow Dolly vs Flat Towing vs Trailer Towing
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: My Trailer Hitch Doesn't Fit