Flange Bolt Pattern and Distance From Flange To Rear Of #84 E-Z Lube Spindle TRU74FR
Question:
What is the distance from the outboard end to the flange and what is the bolt pattern of the flange? Will this fit a 10inch rotor? Thanks
asked by: Chris B
0
Expert Reply:
The #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter # TRU74FR you were looking at has a 4 bolt mounting flange that has holes 2-7/8" apart on center, and from the outside edge of the flange to the end of the spindle is 3-1/4" as shown in the included diagram.
This spindle will work perfectly with a 10" rotor.
I included a video of the # TRU74FR for you to take a look at.
expert reply by:
Samuel C
0
Dimensions of # TRU74FR
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Brake Assembly Bolt Hole Measurements for Attaching to Brake Flange
- Search Results: akhd~545~35~ez~k
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer electric brakes
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: 84 spindle
- Search Results: spindle
- Video: Feature Breakdown: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle
- Q&A: Length of Inner Part of #84 Spindle
- Q&A: Acceptable Range of Spindle Deflection on Torsion Axle
- Q&A: Replacing Damaged Axles and Spindles on a Yacht Club Trailer
- Shop: Tire Chains
- Q&A: Is Broken Zerk Fitting of Trailer EZ Lube Spindle a Problem
- Q&A: Inner Bearing to Brake Flange Dimension of # 84 Spindle TRU74FR
- Search Results: tc2327
- Search Results: 023 026 00
- Search Results: tru74fr
- Video: Measuring To Choose The Right Trailer Axle
- Video: Breaking Down the Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams