Can a Lippert Axle be Replaced with a Dexter Axle?
Question:
Hi I’m looking for a replacement axle beam only Mine is a lippert brand 93” hub face 79” spring center 6000lb Straight no spindles Wasn’t sure if you have one in stock or if dexter is interchangeable Thanks adam
asked by: Adam
0
Expert Reply:
We do have a straight Dexter axle that is very close to your Lippert one. The # 7461121 will be 95 inches from hub face to hub face and 80 inches from center of one spring seat to the center of the other. The branding of the axle typically doesn't make a difference as long as the measurements match or are very very close.
expert reply by: Lazer S
0
Products Referenced in This Question
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 6,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 6000 lbs
- Spindles Only
- 80 Inch
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 14125A and 25580
- Race 25520 and 14276
- 7000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch
- 95 Inch Long
- Drop - 4 Inch
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Replacement 3 Inch Diameter Axle Beam with 95 Inch Hub Face Dimension
- Identifying Dexter Axle Marked P-11 With 70 Inch Spring Center Measurement
- Is the Dexter 7359765-EB A Drop Spindle Axle
- Where is Drop Measured on Trailer Axle
- Should I Replace The Spindle Or The Axle On My 2009 Fleetwood Pioneer 23FQ Travel Trailer
- Is it Okay to Use Two Axles of Different Capacities on a Tandem Axle Trailer
- What Info is Needed to Pick Out Replacement Axle for Trailer
- Replacement 3,500 lb Trailer Axle With 95 Inch Hub Face to Hub Face Measurement
- Adding Lift to 3,500 lb Trailer Axle
- Is 76" Spring-Center Measurement Abnormal for 95" Wide Trailer Axle
- Replacement for Lippert 3500 Lb Axle
- Replacement Axle Needed for 4" Drop AL-KO 3,500 lb Axle
- How Do I Measure the Drop Distance on a Trailer Drop Axle?
- Recommended Drop Axle for Trailer With 80 Inch Spring Center
- Replacement Drop Axle for Old Horse Trailer with 6 on 5-1/2 Inch Bolt Pattern
- Does Drop Spindle Add Clearance?
- Replacement for a Marine Master Boat Trailer Axle
- Can Leaf Springs be Moved to Top of Underslung Axle
- How To Lower a Trailer 3 Inches
- Comparing Amount of Drop of Torflec Axle with a Drop Axle
- How to Mount Leaf Springs to Top of New Boat Trailer Axle
- Can I Change Out Longer Hangars and Short Equalizers for Longer Ones to Gain Fender Clearance
- Recommended Leaf Springs and Leaf Spring Hangers for Dexter 3,500 Lb Drop Axle
- Will Axle Flex Under Load
- Should The Drop Spindle On a Leaf Sprung Trailer Axle Be Angled Toward The Rear Of a Trailer?
- Is the Castle Nut and Lock Washer Included with the Dexter Axle Part # 7685269