bing tracking image
Q & A Icon

Will The MORryde Orbital Rotating Pin Box Fit

Question:

I WANT TO BUY THIS, BUT MY TRAILER PIN BOX IS 12.5 INCHES WIDE AND THE MP72VR IS 12 INCHES WIDE. CAN I USE SPACERS? and DO YOU SELL SPACERS TO MAKE THIS FIT? ALSO THE BOLT HOLES ON MINE ARE 9.5inch APART HORIZONAL WITH ONLY TWO BOLTS IN PLACE ON EACH SIDE. BY LOOKING AT THE DIAGRAM IT LOOKS LIKE I CAN MAKE THIS WORK. PLEASE GIVE ME YOUR OPINION

0

Expert Reply:

The MORryde Orbital Rotating Pin Box, # MR72VR, is built for trailers with a GVWR up to 11,500 lbs. and is designed to replace Reese Revolution 16K pin box. If you currently have this pin box installed then yes, the MORryde will work.

In selecting a replacement pin box, you will need to find out the part number of the pin box (king pin) currently on the trailer. The pin box number is usually displayed somewhere on the pin box, either on a sticker or stamped into the king pin itself. If it's not there or worn out, you need will need to call the trailer manufacturer with VIN or serial number to have them provide the coupler type.

These are custom designed, they simply bolt in place of the existing king pin and do not require drilling or spacers for proper fitment. Attempting to modify the fit of these items is not suggested.

If you discover that you have the Lippert 1621HD, then you will want either the # MR84VR, # MR74VR, or # MR64VR, depending on trailer weight. There are other models for the Lippert 1716 and 1116 options as well as for the Venture and Leland. Please note the attached links.

expert reply by:
0
Michael R

Products Referenced in This Question





Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Similar Expert Q&A Pages