Where Do You Drill 4" Hole For B&W Turnoverball BWGNRK1104 In 2013 Ford F-150 W/ 5-1/2' Bed?
Question:
I have a 2013 ford f150 short bed. The bed i 57inch long measuring when the tail gate is down from the front to the back end of the bed. To cut the hole in the be is the measurement the same for the hole. I have no clue if all short bed fords have the same measurements as my ford. will the bwgnrk1104 Gooseneck fit my truck using the 45 1/8 measurement. thanks for your time and effort.
asked by: James B
Expert Reply:
To install the B&W Turnoverball Gooseneck Hitch # BWGNRK1104 you were looking at in your 2013 Ford F-150 with the 5-1/2' Bed you will need to measure from the end of the bed where the tail gate ends forward 45-1/8" as you mentioned. This will be the location you will need to drill the 4" diameter hole for the gooseneck hitch.
All of the F-150's no matter the bed size will use the same measurement.
I included a video review of the # BWGNRK1104 for you to take a look at.
Product Page this Question was Asked From
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Gooseneck Hitch
- Below the Bed
- Manual Ball Removal
- 7500 lbs TW
- 30000 lbs GTW
- Removable Ball - Stores in Hitch
- Wheel Well Release
- 2-5/16 Hitch Ball
- B and W
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Gooseneck Hitch
- Shop: Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
- Shop: Suspension Enhancement
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Search Results: offset 5th wheel gooseneck adapter
- Video: Hands-On with the 4" Offset Ball for B and W Turnoverball Gooseneck Trailer Hitches
- Video: B and W Gooseneck - Below the Bed - BWGNRK1104 Review
- Q&A: Recommended Gooseneck Hitch and Offset Hitch Ball for 2004 Ford F-150 with 5-1/2 Foot Bed
- Q&A: Gooseneck Hitch For A 2013 Ford F-150 With A 5-1/2 Foot Bed
- Search Results: fixed ball ~ offset gooseneck hitch
- Q&A: How Do I Measure To Find The Center of the Hole For My B&W Turnoverball Gooseneck On 2014 F-150?
- Video: Install: 4" Offset Ball for B and W Turnoverball Gooseneck Trailer Hitches on a 2021 Ram 2500
- Q&A: Does the B&W Turnoverball Gooseneck Hitch for 2011 Ford F-150 Come With Everything Needed to Install
- Shop: Trailer Hitch
- Video: Feature Breakdown: Curt Spyder Gooseneck Trailer Hitch for Fifth Wheel Rails, 25,000 lbs GTW
- Search Results: air bag suspension
- Shop: Hellwig EZ-990 Helper Springs - Above Axle
- Shop: 4" Offset Ball for B&W Turnoverball Gooseneck Trailer Hitches
- Shop: Trailer Wiring
- Search Results: offset gooseneck ball
- Shop: Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
- Shop: B&W Turnoverball Gooseneck Custom Installation Kit for Chevy/GMC
- Shop: Trailer Valet JXC Trailer Jack w/ Footplate and Drill Powered Option - A-Frame - Sidewind - 5K
- Q&A: Weight Distribution System Recommendation for a 2013 Ford F-150 Towing 8500 lb Trailer
- Q&A: Best Way to Prevent Sagging Suspension When Towing a Trailer
- Q&A: How Much Does The Curt Double Lock, Flip and Store Underbed Gooseneck Hitch # C60721 Weigh?
- Shop: Brake Controller
- Search Results: gooseneck hitch
- Search Results: gooseneck hitch
- Search Results: trailer valet xl
on Gooseneck Hitch
