Is Bolt Pattern of Stromberg Carlson JSC-24 Scissor Jack Compatible w/ Existing Holes on Rpod R176
Question:
Will the Stromberg Carlson Trailer Scissor Jacks part # JSC-24. Bolt on to my 2015 R176 Rpod. The bolts will need to match because I cant weld them. I bent one stock scissor jack.
asked by: Judith D
1
Helpful Expert Reply:
I have no source or database that would provide me with the existing bolt hole spacing on the underside of your R176 Rpod, but I can provide you with the dimensions/spacing of the bolt holes on the mounting plate of the # JSC-24 Stromberg Carlson Scissor Stabilizer Jack that you can compare to the existing holes on the camper's frame members to see if it would fit.
The relevant dimensions are shown in the provided photo. I'll also link to a product demonstration video featuring the jack you'd asked about.
Mounting Bolt Hole Pattern of Stromberg Carlson JSC-24 Stabilizer Jack
(click to enlarge)
(click to enlarge)
helpful expert reply by: Mike L
1
Product Page this Question was Asked From
Leveling Scissor Jack Set - 24" Lift - 10,000 lbs - QTY 2
- Camper Jacks
- Leveling Jack
- Stabilizer Jack
- Scissor Jack
- 9001 - 10000 lbs
- 24 Inch Lift
- Bolt-On
- Weld-On
- 2 Jacks
- Stromberg Carlson
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- RV Scissor Jack Solution with Round Upper Mounting Bracket
- Class C Motorhome/RV Stabilizers That Are Not Permanently Attached To The Frame
- Stabilizer Jack Recommendation for Stored Boat Trailer To Support While in Storage
- Is Lippert Scissor Jack Set # JSC-24 Strong Enough for Trailer with 16,000 Pound GVWR
- Can a Drill Adapter be Used on a Standard Type Trailer Jack Like the Bulldog BD190754
- Can Leveling Scissor Jacks # JSC-24 be Used to Lift Trailer
- Scissor Jack Recommendation to Replaced Damaged Ones on R Pod Trailer
- Can the Leveling Scissor Jack Set Be Used On a Class C Motorhome
- Can Leveling Jack be Used to Lift Wheels off the Ground?
- Replacement Stabilizer Jacks for 2020 Rpod 195
- Are Stromberg Scissor Jacks # JSC-24 Higher Quality
- How to Use Power Drill to Make Raising and Lower Scissor Jacks for Camper Quicker
- Are Mounting Holes of Trailer Mounted Stabilizing Jacks Universal
- Replacement Scissor Jack for a 2017 Rpod 179 Hood River Edition
- Where Should Stabilizing Jacks be Installed on a Winnebago View
- Recommended Cost Effective Leveling Jacks For 2014 Thor Four Winds Class C Motorhome
- What is the Difference Between a Stabilizing Scissor Jack and a Leveling Scissor Jack
- Comparing Trailer Jacks and Stabilizers
- Should Stabilizers or Jack Stands be Used to Stabilize Boat Trailer for Winter
- Recommended Support Jacks for Rear of Tandem Axle Dump Trailer
- Additional Mounting Hole Measurements for Stromberg Carlson Scissor Jacks
- Does Stromberg Carlson Camper Jack # JSC-24 Use Stamped Construction
- Can the Leveling Scissor Jack Set # JSC-24 Lift a Trailer
- Recommended Leveling Stabilizers to Reduce Bounce When Walking in Trailer
- What are the Dimensions of the Jack and Handle in the Leveling Scissor Jack Set, # JSC-24
- Dimensions of Trailer Side Mounting Plates on Stromberg Carlson Scissor Jack # JSC-24 and # JSC-30
- Is Mounting Hardware Included on Stromberg Carlson Trailer Jack , # JSC-24.
- Mounting Hole Spacing Across Tabs for the Leveling Scissor Jack Set