Which Idler Hub For Kodiak Slip On Disc Brake Kit With 10" Rotors and 5 Lug Bolt Pattern
Question:
Hi I purchased Kodiak 225 caliper and rotor kit for boat trailer. Did not realize my customers trailer hub and rotors are 1 piece. Can I purchase just the hubs seperate? They are 10inch rotors 5 lug. Thank You
asked by: Jim I
Expert Reply:
Since your customers boat trailer has 10" single piece rotors currently on it that tells me that they have a 3500lb axle and that you ordered the Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs # K2R35D.
For a compatible idler hub to work with this two piece rotor kit you will want to go with the Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized Steel # Q-HUB84545 which has the 5 on 4-1/2" bolt pattern you were looking for and is designed specifically to fit 3500lb axles.
I included videos of the products mentioned for you to take a look at.
Products Referenced in This Question
Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized Steel
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 6 on 5-1/2 Inch
- Rotor
- 5200 lbs Axle
- 6000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Kodiak
more information >
Continue Researching
- Search Results: hub and rotor
- Shop: Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Search Results: break pads
- Search Results: bearings
- Video: Hands-On with the Kodiak Ceramic Brake Pads
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Kodiak Ceramic Brake Pads - 3,500 lbs to 6,000 lbs
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Search Results: kod59fr
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Dimension From Center of Rotor to Outer Edge of Caliper on Kodiak Disc Brake Kit # K2R526D
- Video: Dexter 10" Hub-and-Rotor Assembly: The Breakdown
- Search Results: trailer disc brakes
- Q&A: Recommended Electric Lockout Solenoid for Surge Brake Actuator
- Shop: Suspension Enhancement
- Shop: Ladder Rack
- Search Results: kodiak 225 caliper
- Search Results: races
- Q&A: Need To Replace Old Grease Seal # 171255
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Replacement Rotor Hub Needed for a 2004 Four Winns Trailer