What is Normal Operating Temperature Range for an Automatic Transmission
Question:
What is the normal transmission temperature for a 2011 Dodge Journey Mainstreet 62TE transmission?
asked by: Allison W
Expert Reply:
Because there are so many variables that dictate what a transmission's temperature will be, it's not possible to point to a 'typical' temperature, but there's definitely an acceptable range. The ambient temperature, the speed the vehicle is traveling at, the elevation, the type of terrain you're driving in, how heavily the vehicle is loaded and whether or not the air conditioning is running will all influence how hot the transmission fluid gets.
Strictly speaking, 175-210º is roughly the normal operating range. When you get above 220-240º is where you're going to have problems.
There are many things you can do to improve the life of your transmission. Change the fluid at the manufacturer's recommended intervals. If your vehicle has a transmission temperature gauge pay attention to it, especially if you're on a hilly area on a hot day. When the temperature starts climbing, turn off the AC, and you can even crank the heat up full-blast to shed some of the extra heat in the system. You'll also want to make sure that your cooling system is in good order, because most automatic transmissions have a loop running through the radiator to provide cooling.
One of the best and least expensive things you can to to protect your transmission is to install a supplemental transmission cooler like # D13502. The cooler would install inline with the transmission return line from the radiator back to the transmission.
I've linked to a video showing a typical installation as well as to some help articles that explain how transmission coolers work.
Products Referenced in This Question
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Mid-Size Truck
- SUV
- Van
- Standard Mount
- 11W x 7-1/4T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 900 lbs TW
- 6000 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Hitch and Trailer Wiring Harness Recommendation for 2020 Jeep Grand Cherokee
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Hidden Trailer Hitch & Wiring Harness for 2018 Dodge Durango
- Q&A: Will any of the Hitches for a 2019 Jeep Grand Cherokee Laredo Fit with 20 inch Spare
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Best Hidden Trailer Hitch Recommendation for 2020 Dodge Durango
- Q&A: Hidden Hitch & Trailer Wiring For 2019 Jeep Grand Cherokee
- Q&A: Can Hitches for 2020 Dodge Durango Fit With Spare Larger than 18 inch Wheel Size
- Article: How Much Trailer Can I Really Tow
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Wiring Diagrams
- Article: Determining Trailer Tongue Weight