Why Would Timbren On One Side of Truck be Compressed and Other Not at All

Question

Question:

When we installed the timbrens, the passenger side is touching the axle while the camper is off the truck. There is clearance on the driver side. See photo. What can we do?

asked by: Allen L

1

Helpful Expert Reply:

The unloaded picture of your Timbren setup installed on your truck is concerning. Does the truck seem to sit level from left to right? Was it ever in an accident by chance? Are any of the suspension components worn out?

You really shouldn't see that much compression on one side of the truck with that much gap on the other side unless something with the truck is bad.

expert reply by: Jameson C

1

Timbren spring compression
(click to enlarge)

Answer 1

First of all, thank you for your service. Unfortunately at this time we don't offer a military discount, but we do have free shipping most of the time on orders like this one. To confirm your fit, we have two sets of jounce springs available from…

view full answer...

Answer 2

There are two Timbren systems for your 2023 Ford F-350, like you said, with the best definitely being the following part number: - Timbren Suspension Enhancement System #TFR350SDJ The reason for that is the #TFR350SDJ is designed for standard pickups…

view full answer...

Answer 3

Yes, the Timbren Suspension Enhancement System #TFR350SDJ that fits your 2022 Ford F-350 is compatible with the TorkLift StableLoad. The two install completely separately so there won't be any interference between the StableLoad and the…

view full answer...

Answer 4

Yep, it sure does; the Timbren suspension enhancement you asked about is a fit for your 2022 Ford F-350 Tremor. The correct part number is the following: - Timbren Suspension Enhancement System #TFR350SDJ The Timbren #TFR350SDJ are a really smart…

view full answer...

Answer 5

For your 2021 Ford F-350 Super Duty I recommend the Timbren Suspension Enhancement System - Rear Axle #TFR350SDJ. These have an 8,600 lb capacity and help with vehicle sag while increasing stability. The springs work independently so they help…

view full answer...

Answer 6

When considering whether to get Timbrens like #TDR1500DS or the SumoSprings like the #SSR-307-47 on your 2022 Ram 1500, I recommend the SumoSprings to deal with your rear sag. The SumoSprings will help restore the sagging as well as give you a…

view full answer...

Answer 7

Yes, adding the Timbren Suspension Enhancement System - Rear Axle, part #TFR350SDJ, will provide stability to your suspension. It will be a fail safe to keep your 2017 Ford F-350 Super Duty level when you are towing your 5th wheel. Your suspension…

view full answer...

Answer 8

Big trucks like your 2023 Ford F-350 Super Duty often need some suspension help, and what I recommend are definitely Timbrens, with the correct part number for your '23 F-350 being the following: - Timbren Suspension Enhancement System #TFR350SDJ…

view full answer...

Answer 9

From the top of the bracket to the bottom of the rubber spring the #TFR350SDJ Timbrens measure about 7-1/2 inches. When installed you ideally want about a 1/2 inch to an inch of space between the Timbren and its contact point. However, to install…

view full answer...

Answer 10

It is completely normal for the Timbren Suspension Enhancement System #TFR350SDJ to be in constant contact without a gap on your 2017 Ford F-350 with 400 lbs in the back. Using Timbrens on a heavy duty truck like your F-350 Super Duty means there is…

view full answer...

Answer 11

The Timbren Suspension Enhancement System #TFRTT350J are the correct rear suspension enhancements for your 2022 Ford F-350 4x4. These suspension enhancements will help improve safety and handling as well as, and reduce body roll when swerving and…

view full answer...

Answer 12

Porpoising (bouncing like you described) and sway are both commonly caused by the same thing when towing and that is not enough tongue weight for the trailer relative to the total amount of weight the trailer weighs. You need the tongue weight to be…

view full answer...

Why Would Timbren On One Side of Truck be Compressed and Other Not at All

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching