bing tracking image
Q & A Icon

Brake Controller Wiring Harness to Install Redarc Tow-Pro Brake Controller on 2020 Jeep Gladiator

Question:

Will this be compatible a 2020 gladiator rubicon with tow package?

0

Expert Reply:

The # RED67FR brake controller wiring harness is compatible with both the # RED44FR Tow-Pro Elite and the # RED24FR Tow-Pro Liberty brake controllers, but the it's not compatible with the Jeep Gladiator. The good news is that we do offer a harness arrangement that would allow either controller to install on your Gladiator.

You'll need both the # 3073-P and the # 331-TPH-017 adapter if you go with the Tow-Pro Elite or if you decide that the lower-cost proportional # RED24FR Liberty model would work better for you, you'll need the # 3073-P harness and the # RED69FR pigtail. To install the Liberty, you'd cut off the black connector on the # 3073-P harness and wire it color for color with the # RED69FR pigtail. The installation of the Tow-Pro Elite would be completely plug and play.

The connector under the dash is located to the left of the steering column near the top of the e-brake pedal.

I'll link to an installation video that you might find helpful.


Brake Controller Connector Location 2020 Jeep Gladiator
Brake Controller Connector Location 2020 Jeep Gladiator
(click to enlarge)
expert reply by:
0
Mike L

Products Referenced in This Question






Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>