Availability Of Pre-Greased and Assembled 3500lb Idler Hub with 5 on 4-1/2 Bolt Pattern
Question:
Do u offer the dexter as a complete unit with bearing installed ready to install on spindle..?
asked by: Wes H
Expert Reply:
I have another option for you, but we do not offer the Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 # 84545BX you were looking at pre-greased and assembled. The reason for this is the pre-greased and assembled hubs come that way from the manufacturer and that is not something Dexter offers.
Instead I recommend the CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased # CE13515 which is the exact same hub as the Dexter option, but comes pre-greased and with the bearings and grease seal installed so it is ready to go directly on the spindle.
I included a video of the # CE13515 for you to take a look at.
Products Referenced in This Question
CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- CE Smith
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Replacement Dexter 8-248 Hub, Races, Bearings and Grease Seals For Boat Trailer
- Replacement Dexter Idler Trailer Hub With 8-248 and T20 Stamped on Back Of Hub
- Bearings Included with Dexter Hub 84545BX
- Replacement Bearing Kit for Dexter Axle 8-248 Idler Hub
- How to Choose Correct Idler Hub Replacement for Dexter Axle 8-256 Hub
- Availability Of Galvanized Idler Hubs To Replace Dexter 8-248 Idler Hubs
- Trailer Hub/Drum and Brake Assemblies to Fit in Place of Dexter 3,500 lb Axle Idler Hub
- What is the Inner Diameter of the Grease Seal that Comes with Trailer Hub # 84545BX
- Will Dexter 8-248 Dexter Hub Replace Reliable R1001 Hub
- How to Select the Correct Hub for Trailer
- After Installing New Hubs Do You Have to Break Them In
- Finding Replacement Hubs for Older Trailer
- Bearings and Drum Size for 84 and 42 Spindle
- How to Pick Out a Replacement Hub for a Trailer
- Replacement Axle for Lippert 5200 that is 86.5 inches Long
- Origin And Stud Dimensions Of Dexter # 84545BX Trailer Hub
- Trailer Hubs that Will Fit Dexter 3,500 lb Axle
- Do the Races Come Pre-Installed on Trailer Hub Assembly, # 84545BX
- Replacement Bearings for Dexter Idler Hub Assembly for 3500 lb Axles # 84545BX
- Idler Hub Needed for 3500 lb Axle
- Replacement Hub for Utility Trailer with Dexter 8-256 Hub
- D Washer for 3,500 lb Hub Assembly Item # 84545BX
- Can 3,500 Lb Hub be Used to Replace 2,000 Lb Hub with Same Size Bearings
- Hub Recommendation to Replace Dexter Hub Marked 8-248
- Replacement Dexter 8-248 Hub Recommendation
- Spindles for a Trailer Hub Assembly for 3500 lb Axle
- Dexter Hub Vs. Kodiak Hub Comparison