Could Aluminum Car Hauler Ramp Set Carry 2015 Chevy SS

Question

Question:

So I just wanted to check and see if these ramps would work with loading a 2015 Chevy SS Sedan onto an aluminum trailer. Car comes in around 4,000lbs.

asked by: Joseph

0

Expert Reply:

The Aluminum Car Hauler Ramp Set # 288-07503 that you referenced has a 6,000 lb weight capacity so it would easily handle the weight of your 4,000 2015 Chevy SS.

expert reply by: Jameson C

0

Answer 1

With the Stallion Aluminum Car Hauler Ramp Set - 72" x 14-1/2" - 6,000 lbs - Qty 2 #288-07503 having a combined weight capacity of 6,000 pounds, they look to be ideal for your application. These are also 11-3/4" wide, so your 10"…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Hello Gary. For your 2024 Chevy Silverado 2500 HD with short bed it is recommended to have a sliding hitch to ensure that you can get around those really tight turns without damaging the cab of your truck. For a Curt sliding hitch I would recommend…

view full answer...

Answer 5

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 6

Hello Paul, thanks for reaching out. The inside dimension of the Curt Heavy-Duty Dual Ball Attachment for Weight Distribution Shanks #C29NR is 2". It will work with any standard weight distribution shank. I edited a picture to illustrate.

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hello Volker, thanks for reaching out. For your 2024 Chevy Silverado 2500 6.5' bed with steps in front and back of the bed you can use the following Torklift Camper Tie Downs: - Custom Fit Tie Down Kit #TL86NR Keep in mind that these will only…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

Yes, you do. Since your 2024 Chevrolet Silverado 2500 has the shorter 6-3/4' bed you will need to use a sliding 5th wheel hitch to avoid running into your rear bumper or smashing you back window when turning. I recommend the B&W Companion OEM…

view full answer...

Answer 11

Hello Brad, we have exactly what you are looking for! You can use the Curt Adapter Rails #C88KR. This will attach directly to the OEM puck system (the 5 pockets) in the bed of your 2024 Chevy, and it will give you the industry standard rails you can…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Could Aluminum Car Hauler Ramp Set Carry 2015 Chevy SS

Continue Researching