What Hubs Do I Need To Work With The Timbren Axle-Less Suspension System # ASR1THDS01?
Question:
Do you sell compatible hub assembly with lug pattern 6 on 5.5?
asked by: Mark J
Expert Reply:
The Trailer Idler Hub Assembly # AKIHUB-655-35-EZ-K is the correct fit for the Timbren Axle-Less Trailer Suspension System # ASR1THDS01. It has the E-Z lube cap and the 6 on 5.5" lug pattern.
If you are in need of a braking axle the Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K is the hub you will need. You can pair this with the Electric Trailer Brake Kit # AKEBRK-35-SA for self adjusting drum brakes.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - No Drop - 4 Bolt Flange - 2,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- EZ Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 4 Bolt Flange - 2.2K
- Q&A: Availability of 2200 Lb Replacement Axle With Brake Mounting Flanges and Greater Than 60 Inch Length
- Q&A: Can Brakes Be Added to the 2K Timbren Axle-Less Trailer Suspension System
- Q&A: Recommendation to Upgrade Axle and Hubs on Northern Hardware Trailer
- Q&A: Recommended Suspension for 5x8 Northern Tool Trailer
- Q&A: Recommended 5 Lug Timbren Axle-Less System for 13" Trailer Tires
- Q&A: How to Choose Correct Replacement Trailer Idler Hub
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Tire Sizing
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Where to Position the Trailer Axle?
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Hitch Receiver Sizes
- Article: RV Cell Boosters, How Do They Work?