Recommended Coupler Locking Pin For A Demco eZ-Latch Auto Latching Trailer Coupler  

To be able to lock the latch on the Demco Trailer Coupler - Adjustable Channel Mount #DM14976-52 you were looking at I recommend the Bulldog Easy Access Coupler Lock #BD580409.

Personally I prefer the Demco Trailer Coupler #DM14976-52 with the composite handle over the Coupler #DM15791-81 with a metal handle. I feel it is easier to operate as it does not have the safety latch like you get on the metal handle. Since most…

The Demco Hydraulic Brake Actuator w/ Electric Lockout #DM8759422 you were looking at weighs in at 35lbs and measures 26-7/8" from end to end. The Demco #DM8759422 is designed for trailers with disc brakes, has a maximum trailer weight of…

The only differences between the Demco Trailer Coupler #DM14976-52 and #DM88XR are the colors and the mounting bracket design. The part DM14976-52 is silver and has a straight, or no-drop, design with the bottom of the coupler being towards the top…

The most similar coupler lock we have to the #BLTL-20 that would fit the Demco coupler #DM14976-52 would be the Fastway part #FA86-0015-316 which fits into the coupler and has a bar that runs across the top of it but since it has a little more…

The Bulldog Collar-Lok Adjustable Channel Mount Coupler part #BD028657 uses 5/8" diameter hex head bolts with a grade 5 rating. If you need these, we have the 3 Position Channel and 5 Position Channel Bolt and Nut Kit part #337B9020 which will…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…