bing tracking image
Q & A Icon

Replacement Hubs/Bearings for 2000 Kendon Folding Trailer With 1-1/16 Inch Diameter Spindle

Question:

I want to replace bearings,grease seals and hubs with grease seals on my 2000 Kendon fold-up trailer.Do you have all of the parts needed for this ?The trailer has 1 and 1/16 axels . thanks in advance

1

Helpful Expert Reply:

Your Kendon fold-up trailer has a 2K axle, given the 1.063 diameter spindle you referenced.

Assuming you have idler hubs, you'd need # 8-91-05UC1-EZ for a 4 on 4 bolt pattern or # AKIHUB-545-2-LF-2K for a 5 on 4-1/2 inch bolt pattern. The L44649 inner/outer bearings, L44610 races, 10-9 grease seal, dust caps for standard or EZ lube spindles and lug nuts are included. The hubs are pre-packed with grease and are 100% ready for installation.

If you were just needing the bearing/race/seal kit, you'd use the # BK1-150 kit you'd looked at. The kit also includes a tang washer and a cotter pin.

helpful expert reply by:
1
Mike L

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>