Recommended Bathroom Vent Fan To Replace Older Ventline V2045  

You can replace the motor in your Ventline V2045 exhaust fan with the Replacement Fan Motor for Ventline Exhaust Fan #BCD0390-00 you were looking at. The fan blade replacement is #BVA0312-00 and then the replacement lens is #VC0133-00. These are the…

I spoke with my contact at Ventline and he stated that the correct replacement motor for your model V2045 Bathroom Vent will be the Replacement Motor #BCD0390-00. This will include one motor assembly for your existing vent fan.

The Ventline model V2065 Vent assembly is no longer available. If you are wanting/needing to replace the entire vent then your only option will be with a different model unit that closely matches the dimensions of the V2065. I recommend taking a look…

The Replacement Fan Motor #BCD0390-00 referenced in your question is the correct motor for your Ventline V2045 model fan. I did also go out to our warehouse to take a look at the motor and measured a length of 1-1/2 inches for the exposed length on…

The V2044 fan has been discontinued for awhile, but the Ventline #BCD0390-00 would be the correct 110V-AC motor. I've confirmed that these are the proper replacements with my Ventline representative. For the fan blade the replacement for the…

The V2045 replacement motor is the part #BCD0390-00. The fan blade replacement is #BVA0312-00 and then the replacement lens is #VC0133-00.

The Ventline V2044 Bathroom Ceiling Vent can use the Replacement 110-Volt AC Fan Motor for Ventline RV Bathroom Insert Fan w/100 CFM Capacity #BCD0314-00 or the Replacement Fan Motor for Ventline Exhaust Fan #BCD0390-00. We have confirmed with…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

I spoke with my contact at Ventline and she stated that for your V2245-50 exhaust fan you can use the Replacement Fan Motor #BCD0390-00. This will work perfectly with your existing fan.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…