Replacement Parts For A Titan Model 10 Master Cylinder and Dampers
Question:
I would like to replace the master cylinder on my welded T1607500. Do you know if the master cylinder will come out the front of the outer case ? Also, will the existing orifice connector fit the new cylinder or do I need a reducer. Would you please give me replacement part numbers for the master cylinder, dampers, and reducer/enlarger if needed for the T1607500. Thanks for your help,
asked by: Hardy B
Helpful Expert Reply:
Yes, you will be able to remove the master cylinder from the Titan Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 12,500 lbs, part # T1607500. This is a direct replacement, so you will not need a reducer. The master cylinder you need is for a drum brake actuator. It is the Replacement Master Cylinder and Push Rod Assembly for Drum Brakes - Model 10 and 20 Actuators, part # DX66FR. This replaces the master cylinder and pushrod in the Titan Model 10 Actuator. You will also need the Replacement Cylinder Cover for Titan Model 10 and 20 Actuators, part # T1507000.
I have included product descriptions and video demo links below.
Products Referenced in This Question
Replacement Master Cylinder and Push Rod Assembly for Drum Brakes - Model 10 and 20 Actuators
- Accessories and Parts
- Brake Actuator
- Hydraulic Drum Brakes
- Master Cylinder
- Dexter
more information >
Replacement Cylinder Cover for Dexter Model 10 and 20 Actuators
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Master Cylinder
- Cover
- Dexter
more information >
Product Page this Question was Asked From
Dexter Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 12,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Agricultural
- Construction
- Marine
- Travel Trailer
- Utility Trailer
- Weld-On
- 12500 lbs GTW
- 2-5/16 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Dexter
more information >
Continue Researching
- Shop: Replacement Master Cylinder Assembly for Dexter Model 10 and Model 20 Brake Actuators - Drum
- Shop: Dexter Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 12,500 lbs
- Video: Dexter Brake Actuator Review
- Q&A: Where Do the Rubber Bearings Go On the Titan/Dico Model 10 Surge Brake Actuator
- Shop: Replacement Master Cylinder and Push Rod Assembly for Drum Brakes - Model 10 and 20 Actuators
- Q&A: Replacement Master Cylinder for Titan Model 10 Actuator on 1999 Prestige Trailer
- Video: In-Depth Review of the Replacement Shock for Dexter Model 6 and 10 Brake Actuators
- Shop: Replacement Shock for Dexter Model 6 and 10 Brake Actuators
- Shop: etrailer Hydraulic Trailer Brakes - Uni-Servo - 10" - Left/Right - 3.5K
- Q&A: Replacement for Gabriel Shock Model 610712
- Shop: Replacement Hydraulic Cylinder Assembly for Demco 10" Marine Free Backing Brakes - Left Side
- Search Results: grease cap
- Search Results: titan brake actuator
- Shop: Replacement Orifice Connector for Dexter Actuators
- Q&A: Replacement Inner Coupler Slide for Dexter Axle Model 20 Brake Actuator
- Video: Titan Master Cylinder Assembly Installation
- Search Results: dexter model 10
- Video: Replacement Master Cylinder and Push Rod Assembly for Drum Brakes Spec Review
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Search Results: gooseneck coupler
- Search Results: coupler
- Video: Titan Brake Actuators with Reverse Lockout Replacement Solenoid Valve Installation
- Video: Demco Hydraulic Brake Line Kit for Single Axle Trailers: The Breakdown
- Q&A: Does Titan Model 10 Actuator Replace Dico Model 10
- Q&A: What is Length of Main Body of Dexter Surge Actuator part # T1607500
- Q&A: Replacement Master Cylinder Recommendation for a Model 10 Actuator with Drum Brakes
- Search Results: bearing 25580
- Article: How to Bleed Your Trailer Surge Brakes
- Search Results: brake line