Converting 7,000 Pound Grease Hubs Over to Oil Bath Hubs
Question:
Hi. ?an you recommend me which kit should i buy? I have a 7K Grease hubs. Please see attached photos.
asked by: Vitaly
Expert Reply:
To replace your grease caps with oil bath, you will need to measure the bore of the hub, where the cap sits. The Lippert hubs that were used on their axles can have some odd sizes so it is a good idea to double check. With that being said, if the measurement you get is over 2.25", you will need to replace the hubs.
If this is the case, you will need the Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath # 8-219-9UC3-A if your seal has a 2.250" inner diameter, or the # 8-219-9UC3 if the seal has a 2.125" inner diameter. Both of these will come with the oil caps and replacement bearings and everything needed.
If the measurement of the hub bore is 2.25", the Kodiak XL ProLube Kit # XLPROLUBE2440KIT will be the correct part for you. This will require the cleaning of the hubs and bearings, but will not be overly difficult to get done.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Oil Bath
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Oil Bath
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Kodiak XL ProLube Kit for for 5,200-lb to 6,000-lb Axles
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 2.440 Inch
- Kodiak
more information >
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Q&A: Correct Bearing Kit for 2019 Jayco North Point 315RLTS
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Search Results: bearing packer
- Video: Timken Bearing Kit Installation
- Shop: Timken Bearing Kit, 14125A / 25580 Bearings, 14276/25520 Races, 10-36 Seal
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Video: What to Know About the Powerbuilt Deluxe Bearing Packer
- Shop: Timken Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, GS-2125DL Seal
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: axle bearing
- Search Results: timken
- Video: Review of the Dexter Trailer Hub and Drum Assembly
- Search Results: 17.5 wheels
- Shop: Taskmaster Modular Wheel w/ +0.08 Offset - 17-1/2" x 6-3/4" Rim - 8 on 6-1/2 - Silver
- Shop: Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 5/8" Studs
- Q&A: Looking For Bearing Kit For 2017 Jayco Northpoint With Lippert 7K Axles
- Shop: RV Camera
- Shop: RV Interior Lighting
- Q&A: Are Oil bath Hubs a Better Option for My 7,000 Lbs Axles Than Using Grease Hubs
- Q&A: Replacement Bearing Kit With Seal for 7000 lb Lippert Axle
- Q&A: Is Bearing 28580 Standard or Heavy Duty
- Q&A: How to Pick Out a Hub for a Lippert Axle
- Q&A: Correct Replacement Grease Seal For 7000lb Lippert Axle
- Search Results: 17.5 wheel
- Video: The Low-Down on the Replacement Trailer Hub Wheel Stud, Drive-In, 5/8" x 3-1/8" (Qty 4)
- Search Results: 8~219~18uc3
- Search Results: valcrum
- Video: Review of Optronics Trailer Lights - LED Amber Clearance Light - MCL44AB