What is the Shipping Weight of the Horizontal E-Track 94 Inch Long- Pack of 4  

Since heat rises I would at the very least put a set of the Trailer Vents #HMAV2-AVT2 near the top of the trailer to get the hottest air of the trailer out. What you could do for maximum air flow in your trailer is have a set facing forward in the…

We don't have a floor length backing plate for the e-tracks. To do a flush mounted setup you could put a sub-floor in the trailer attach the e-track to that and then install the floor between the e-tracks to give it a flush type setup. With…

Yes, the wheel of a motorcycle or bicycle can rest on an e-track no problem.

The manufacturer does not provide a weight rating for the Erickson E-Chock Wheel Chock for E-Track, #EM09162. These are designed with overall dimensions of 8-1/2" long x 6-3/8" wide x 4-1/2" tall and to be used with a…

Thanks for your pictures! That's what Wranglers are meant for. At 4500 pounds, the weight of the secured cargo would exceed the combined safe working load limit of 1,100lbs per tire of the straps being used on the Erickson E-Track Tie-Down…

You could use chock #EM09162-2 with a wheel strap such as #EM58523 but considering the size of the tires on your 1994 Land Cruiser rock crawler I would not use this as the primary method of securing the vehicle to the trailer. I like the idea of…

The etrailer Horizontal E-Tracks like part #e42VR are a great option for securing vehicles especially when combined with the Erickson E-Chock Wheel Chocks part #EM09162-2 and Erickson E-Track Strap with Ratchet part #EM59136. I don't really…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck…

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…