Recommended Vehicle Wiring Harness For 1995 Ford F-Series Super Duty Cab and Chassis

Question:

I found this hitch plate to bolt right up to my 95 F- Super Duty Chassis Cab frame. I have searched all over the place and cant seem to find a plug and play wiring harness. Does this exist or should be looking to just splice in all my connections?

asked by: Steven V

Expert Reply:

I would be happy to help, but there is not a plug and play vehicle wiring harness available for your 1995 Ford F-Series Super Duty Cab and Chassis.

If you are needing a 4-way connector we have the Curt # C58044 which will work for you though you will need to use a circuit tester liek # PTW2993 to confirm the functions of your factory wiring, or if you are needing a 7-way connector you will still need the # C58044 but will also need the # ETBC7.

The # ETBC7 plugs into the 4-way connector and requires three additional connections. The blue wire gets run underneath the dash where a trailer brake controller would get installed, the white wire gets grounded to the frame of your truck, and the black wire gets run to the positive terminal of your battery with the included 40 amp circuit breaker.

I included videos of the products mentioned for you to take a look at.