Does The DeeZee Truck Bed Mat Come Pre-Cut For Gooseneck Hitch On 2021 Ford F-350?

Question

Question:

I have a factory goose neck hitch, is the mat designed with holes for the receiver ball and safety chain eyes?

asked by: Norris W

0

Expert Reply:

The DeeZee Custom-Fit Truck Bed Mat # DZ87011 that you were looking at would need to be cut in order to have access to your gooseneck hole in the bed of your 2021 Ford F-350. This does not have pre-cut holes for gooseneck or 5th wheel, nor do any other truck bed mats for your truck.

This is a very high quality anti-slip mat that would do a great job of protecting your truck bed. It resists most chemicals and also is raised slightly off the bed to prevent moisture build-up.

expert reply by: Andrew N

0

Answer 1

The Equal-i-zer Weight Dist Shank part #EQ90-02-4600 should allow you to tow with the tailgate down on your 2017 Ram 3500. I have attached a photo for you of this shank used with a similar system on a similar truck

view full answer...

Answer 2

I apologize for any confusion on what the proper torque specs are for 1/2 inch lug nuts on trailer wheels. I attached a picture of a chart to the right that details what the proper torque specs are for a trailer wheels lugs based on lug size, wheel…

view full answer...

Answer 3

The MORryde X-Factor Crossmember uses 2 of the Wet Shoulder Bolts #MR52HR. I recommend using the LubriMatic LMX Industrial Strength Grease #L11390 with these bolts. This grease is formulated to work well in both hot and cold climates. It is also…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hey Tim, Good questions, and camper tie-downs are always a touch confusing so I can explain the difference for you between the two TorkLift camper tie-downs for your 2016 Ford F-250 long bed with factory hitch and no running boards. The difference…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 10

Hey Jason, thanks for reaching out! We have a TorkLift tie-down kit for your 2022 Ford F-350 just as long as the electric running boards aren't wheel-to-wheel (I don't believe they are). The kit you referenced is for newer Super Duty pickups,…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A junction box/7-way plug kit like Epicord #277-000141 or #HS381-9000 lets you convert the camper to match the 7-way RV blade type connector format. This avoids the extra connection points and potential trouble spots from using separate adapters.…

view full answer...

Does The DeeZee Truck Bed Mat Come Pre-Cut For Gooseneck Hitch On 2021 Ford F-350?

Featured Help Information

Miscellaneous Media

Continue Researching