Replacement Hub/Drum and Brake Assembly for AL-KO 7230 Hub/Drum Assembly
Question:
Hello, I have recently purchased a used Texas Bragg dual axle with 3500lb axles, angle iron frame and rails what brake hub setup would I need to replace the old brakes? They currently are inoperable as brakes. I found the Code AL-KO 7230 stamped on the hub. Regards
asked by: Doug R
Expert Reply:
From what I have found, the replacement for the AL-KO 7230 hub and drum assembly is the Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased # AKHD-545-35-K.
For brakes, I recommend the Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA. These self-adjusting brakes match your hub and drum assembly as well as your axle capacity.
I have attached a couple reviews and installation videos for your reference.
Products Referenced in This Question
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: al ko 7230
- Shop: Ceiling Garnish for Ventline Roof Vent - 3-1/8" Leg - 14-1/4" x 14-1/4" - Polar White
- Shop: Advent Air Low Profile RV Air Conditioner for Dometic Setup - Start Capacitor - 13,500 Btu - White
- Video: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles Review
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Q&A: Tips for How to Identify a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Video: Optronics 12V LED RV Dome Light Spec Review
- Q&A: How To Re-Pack Grease Trailer Wheel Bearings
- Q&A: Testing Electric Trailer Brakes Using Direct Battery Power
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Search Results: l44649
- Search Results: backing plate
- Search Results: al ko axle
- Search Results: brake magnets
- Shop: Wheel Well Guards
- Shop: Wheel Liners
- Search Results: trailer brakes
- Shop: RV Interior Lighting
- Search Results: dome
- Q&A: How Much Upward Bend Should Trailer Axle Have
- Q&A: Should Trailer Axle have Bend In it that Faces Downward