Question:
I have a boat trailer with dexter 3500lb axles trailer is brand new. It has disk brakes and a actuation coupler on it that fits in 3x 3inch tube. Front axle has no brakes only rear. I want to get rid of disc, and coupler install drum possibly on both axles and straight coupler. I can figure out a battery brake away kit they are pretty universal. Can you give me part numbers for all that is needed? No hydraulics, electric brakes only.
asked by: Cody
Expert Reply:
For replacement hub drums that will fit your Dexter 3,500 axle you would want the part # AKHD-545-35-EZ-K. This is an EZ lube hub that also has the 5 on 4.5 inch bolt pattern you need that will bolt right up to your spindle.
For brake assemblies you would then need the part # AKEBRK-35L-SA for the left hand side and then # AKEBRK-35R-SA for the right hand side. Then for wire to wire up the assemblies you'd just need the # 10-1-1 which we sell by the foot.
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
