Question:
Good day I have a ultra-fab hitch part number 35-94636.I was wondering if I can use these spring bars for My WD. Thanks
asked by: Vincent
Expert Reply:
The weight distribution bars are not interchangeable between manufacturers and often times are specific to a certain hitch due to the weight rating.
You can replace your Ultra-Fab hitch which is obsolete with a Curt MV Weight Distribution System # C17052 for a comparable system. This is a basic weight distribution hitch that is rated for tongue weights of 800-1,000lbs and a maximum trailer weight of 10,000lbs.
I recommend upgrading to a Fastway e2 Weight Distribution # FA92-00-1000 as this will give you a much better hitch that also has sway control built in. The trunnion bars are much stronger and do not fall out like round bars will. This hitch is capable of tongue weights from 600-1,000lbs and a maximum trailer weight of 10,000lbs.
Curt MV Weight Distribution System - Round Bar - 10,000 lbs GTW, 1,000 lbs TW
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW