Correct Replacement Castle Nut, Cotter Pin, and Washer for Trailer with 1" Round Spindle
Question:
I had asked a question the other day, I dont think I gave enough detail. While traveling with my boat on I noticed an issue with my trailer wheel and immediately pulled over. Bearing Buddy and castle nut were gone and I am lucky I did not lose the tire. The axle spindle looks to be okay, will need to rethread it as it has some damage attached. I am not sure if that is advisable or not, but considering this is most likely a custom sized axle I would prefer to repair. 15902-COTTER PIN SPINDLE 15903-WASHER 1.06 SPINDLE 15910-NUT SPINDLE Can you help with cross referencing the parts listed?
asked by: Robert J
0
Expert Reply:
The correct replacement castle nut, cotter pin, and washer for a trailer with 1" round spindle is as follows: Castle Nut part # 165686, Cotter Pin part # 165649, and Washer part # SW1000.
Unfortunately, we can't cross-reference trailer mfg. part numbers but the above parts are fairly standardized so there will be no issues with compatibility.
expert reply by: Conner L
0
Products Referenced in This Question
Cotter Pin - 1/8" Thick x 1-3/4" Long
- Accessories and Parts
- Trailer Leaf Spring Suspension
- Cotter Pin
- ABS Fasteners
more information >
Product Page this Question was Asked From
Similar Expert Q&A Pages
- Replacement Axle Nut for 3500 lb Boat Trailer Axles
- Thickness of Castle Nut 165686
- Replacement Seals and Castle Nut for 2000-lb Dexter Axle with EZ-Lube Spindles and 5-Lug Hubs
- What are the Inner and Outer Diameters of the TruRyde Trailer Spindle Nut
- Torque Specs for Axle Spindle Nut, Suspension Hanger Bolts, and Lug Nuts for Trailer
- Spindle Nut Recommendation for 84 Spindle
- How Tight Does the Castle Nut on a Trailer Spindle Need To Be
- Torque Rating for Spindle Castle Nut
- Thread Count for Trailer Spindle Nut # 165686
- Availability of Castle Nut for Utility Trailer Hubs
- How To Secure A Hub Assembly To A Spindle On A 3,500 Lb. Axle
- Replacement Hubs and Wheels for Nuway Utility Trailer
- Why Does One Brake Assembly Drag more than the Other After Brake Install
- How To Use Bearing Kit for #84 Spindle with Round Spindle
- What Size Socket Works with 1 Inch Spindle Castle Nut # 165686?
- Availability of a Replacement Castle Nut for a Harbor Freight Trailer
- Replacement Wheel Studs for 2018 Keystone Montana 3721RL
- What Tool is Needed to Remove the Castle Nut on a Trailer Axle
- Does Trailer Idler Hub Assembly AKIHUB-545-2-EZ-1K Include Spindle Nut?
- What Is The Tread Size For The # 42 Spindle?
- Replacement Idler Hub For a BTR Spindle On an Enclosed Trailer
- Bearing Kit with Caps, Castle Nuts, and Lug Nuts for Hub with L68149 and L44649 Bearings
- Does 84 EZ Lube Spindle TRU77FR Come with Castle Nut
- Replacement Hub and Drum Assembly and Electrics Brakes for a Dexter P-11 SLR Axle
- Replacement Bearing Kit, Spindle Washer, & Nut For 5,200 lb Lippert Trailer Axle
- Correct Bearing/Race and Castle Nut Kit for 1 Trailer Spindle