Dimensions of Yakima Anchor Plate A Part # Y8810074 and 60-Inch Track for Roof Racks

Question:

What are the dimensions of the A plates that come with the Landing Pad 1? Do you know the inside dimensions of the 60inch Yakima Track width/Ht.?

asked by: Jack

Expert Reply:

The Yakima Replacement Anchor Plate Style-A, Part # Y8810074, comes as a set of 8 plates that measure 3/4-inch x 7/8-inch. The centered threaded hole measures 0.2 inches (or 5.1 millimeters) in diameter. Please refer to the photo provided.

The Yakima 60-inch Track for Roof Racks, part # Y01135, is a set of two tracks with included hardware. I have indicated below the various measurements of the T-shaped channel within the track. The opening at the top of the track measures 0.45 inches wide; the top portion of the T measures 0.8 inches wide inside; the overall inside height of the T measures 0.25 inches; the base of the T measures 0.56 inches wide. A second photo shows the track cross-section with these dimensions indicated.

expert reply by: Adam R

click to enlarge

K M.

4/30/2020

I have been looking every where for a t-nut that would fit a rhino rack RTC-16 track. I know this is specifically for Yakima, but would this work or is there some thing that would work that you could point me to? Thanks