Replacement Remote for Happijac Electric Camper Jack System 4500 and 4150

Question

Question:

Hello. I have a 2011 Northern Lite truck camper with Happijac lifting system. On front there are 4500s and 4150s on rear. My remote controller failed Witch one would be proper to buy? 723915 or 183070Thanks

asked by: Walter

0

Expert Reply:

I checked with Happijac and the correct replacement remote you need for your Happijac system that has 4500s and 4150s is the part # LC723915 that you referenced.

expert reply by: Jameson C

0

Answer 1

The distance between bolts on the HappiJac #LC182496 Jack System, measured center-on-center is 7-1/4" inches and 17" overall length. I have attached a drawing with measurements.

view full answer...

Answer 2

Thanks for the picture! I would be happy to help you Yes, you are correct in assuming you will only need one set of the Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems Item #LC182496. These come in pairs and you will not need them…

view full answer...

Answer 3

The Replacement Remote #LC723915 will work as a wireless replacement remote for camper jack systems LC736514-ELKIT and LC736515-ELKIT. If you have a different model of jack system, let me know and I can check to see if there is a replacement…

view full answer...

Answer 4

It sounds like you may have the older system based on the description of your remote. The #LC723915 is a wireless remote with replaceable batteries. The older remote is sealed and instead of batteries you have to charge it with the included cable.…

view full answer...

Answer 5

If you have a 2-1/2 inch size trailer hitch (opening of the hitch measured) then you could use a longer extension like the #C45048 which can be between 24 and 34 inches long. Most extenders don't have a whole lot of weight capacity but this one…

view full answer...

Answer 6

Well that stinks to hear; I'm sorry someone was lousy enough to steal from you. And while we do have an option for you, the older wired remote is not available as a replacement part. So what you would need to do instead is replace the circuit…

view full answer...

Answer 7

For your Happijack model 4150, I confirmed with Lippert (the makers of Happijack) that the Replacement Circuit Board for HappiJac Electric Truck Camper Jack Systems #LC733513 is a direct replacement for your current control board you have installed.

view full answer...

Answer 8

Yes, you can utilize a phone-style cord like part #LC149557 with that plug on the side of the Replacement Remote Control for HappiJac Electric Camper Jack Systems #LC723915 to operate your jacks. Lippert calls this out in their troubleshooting table…

view full answer...

Answer 9

I reached out to Happijac for clarification and I was told there are two different remote types. The remotes with the newer style logic boards have 25 amp fuses. Remotes with the old logic boards have 20 amp fuses. If you look at the rear of the…

view full answer...

Answer 10

The Replacement Circuit Board w/ Wireless Remote for HappiJac Electric Truck Camper Jack Systems #LC733540 does come with the new circuit board and the remote but not the harness #LC149557.

view full answer...

Answer 11

I checked with my contact at Lippert and he tells me that the #LC149557 is different from a standard phone cord since it is designed to work with logic boards that are specific to HappiJac components.

view full answer...

Answer 12

Since the motors work when connected directly to power and you are getting the green light on the remote, it sounds like everything is operational. The remote with the Replacement Circuit Board w/ Wireless Remote for HappiJac Electric Truck Camper…

view full answer...

Replacement Remote for Happijac Electric Camper Jack System 4500 and 4150

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching