bing tracking image
Q & A Icon

Lippert Ground Control 3.0 Touch Pad Displays "Please Wait And Then Turns Off

Question:

Hi, My 2016 Jayco Eagle fifth wheel was blown over the side with the level control by a hurricane. Put a new battery in and receive Please wait ... and lights for pads light up then all goes blank. Saw one fuse, 30 amp, and its good. Guessing need new control board and touch panel? Any help is greatly appreciated!

1

Helpful Expert Reply:

I spoke to Lippert and they said to check a few things. First, they did say to double check the battery and make sure it is not dropping under 12 volts. The system will always draw from the battery, even when attached to shore power, and the controller needs to stay constant. They mentioned that a common cause of this will be a ground issue. The green wire will be the ground so you will need to make sure this has a solid connection and not stacked with other grounds. The black wire will be the power so I suggest checking to make sure it is a solid connection as well. If you have a good ground and power going into the unit, then the # LC304136 control module will indeed need to be replaced.

helpful expert reply by:
1
Lazer S

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>