bing tracking image
Q & A Icon

Replacement Recommendation For Older Ventline Roof Vent  

Question:

I have a ventline unit that is powered open and fan thru a mounted two switch toggle. This lid lift motor has broken. It seems very cheaply made. Interested in this unit, however the wall mount switch for this unit uses a RJ-11 wire. Mine does not I assume. How can I use this unit? How can I run the wire? Where is the 12 Volt power lead get connected? AT the fan or at the wall switch? Suggestions?

0

Expert Reply:

The Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid # MA00-04751KSX is meant to be a direct replacement however not all the necessary hardware is included.

The remaining items you'll need is the Key Wall Control part # MA00A03550K, Ceiling Garnish part # MA54FR, RJ11 Communication Cable part # 34279523, and the Roof Vent Installation Kit part # 344270KITW.

Included is a picture of where you'll find the RJ-11 and RJ-45 connection points on the MaxxFan Plus 4-Speed Roof Vent with White Lid # MA00-04751KSX.

The 12v power is located on the driver's side of the MaxxFan. The MaxxFan black wire identified with a tag showing(+) must be connected to the vehicle 12 volt (+) positive supply.

expert reply by:
0
Bryce D
RJ-11 And RJ-45 Location
RJ-11 And RJ-45 Location
(click to enlarge)

Products Referenced in This Question





Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>