bing tracking image
Q & A Icon

What Hitch and Wiring Do I Need to Use the Lets Go Aero Bosshog # H01472 on My 2022 Palisade?

Question:

What hitch and wiring do I need for the Lets Go Aero # H01472? I have a 2022 Hyundai Palisade?

0

Expert Reply:

If you are planning to use the 66x24 Lets Go Aero Bosshog Slid-Out Cargo Carrier for 2" Hitches H01472, you will need a compatible hitch receiver and a 4-way wiring harness. For the hitch, I recommend the Curt Trailer Hitch Receiver # C13427. The Curt hitch will allow you to utilize all of the 300 pounds of maximum weight capacity that is offered by the Bosshog. However, it is important to confirm with your owner's manual in order to make sure your 2022 Hyundai Palisade will be able to accommodate that much weight. Also, with the Curt hitch, the measurement from the center of the hitch pinhole to the outside face of your bumper is only 2-1/2 inches. With this distance, the Bosshog will be able to fit into your hitch without any bumper clearance issues.

As for the wiring harness, you need the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118784. With the T-One, you will have full functionality of the turn signals and brake lights of the Bosshog. Another great feature of the T-One is that it includes a ModuLite converter to ensure that your vehicle's wiring matches that of your trailer.

If you need help with the installation of the hitch and the wiring harness, I linked installation videos to this answer to help walk you through the process.

expert reply by:
0

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>