Wiring Guide For The Furrion RV Side Camera W/ Night Vision

Question:

The furrion side camera has 4 wires -camera red wire, traffic lamp Brown wire, trigger signal yellow wire and ground black wire. Which wires are connected together to hot wire and which wires to ground?

asked by: Guillermo V

Expert Reply:

For your LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems # FOS05TASF you will want to follow the wiring as provided below:

RED: Connects to positive wire on running lights circuit.

BROWN: Will connect to the positive wire on your vehicle's running lights circuit.

BLACK: Ground wire

YELLOW: Is the trigger wire, and is only used in LED versions.

expert reply by: Bryce D

Wire color code instructions
(click to enlarge)

Trigger signal use
(click to enlarge)

Ronald M.

7/8/2024

I only have 4 wires on my marker lights cant figure out how to wire 4.

Bryce D.

7/9/2024

@RonaldM If you have the Furrion side marker cameras, then the RED will connect to the positive wire on running lights circuit, the BROWN will connect to the positive wire on your vehicle's running lights circuit, the BLACK is your ground wire, and your YELLOW is the trigger wire,