bing tracking image
Q & A Icon

Parts Needed to Flat Tow 2007 Jeep Wrangler Unlimited with Falcon 2 Tow Bar


i have a 2016 forest river 2801qs and want to flat tow a 2007 jeep wrangler unlimited sahara 4 door, a friend recommended the falcon 2 tow bar and i wanted to order everything to do the job


Expert Reply:

The Roadmaster Falcon 2 Tow Bar part # RM-520 is a really great tow bar to use and one we would recommend highly. Now for a base plate kit the Roadmaster part # 1429-3 is the easiest to use and a direct fit to the Falcon.

For lighting/safety cables, locks, and covers for the tow bar we have the Roadmaster Falcon All Terrain kit part # RM-9243-1 which comes with all of that as one part number. The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.

expert reply by:
Jameson C

Products Referenced in This Question

Product Page this Question was Asked From

Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>