bing tracking image
Q & A Icon

Recommended 2-Step Upgrade for 2018 Lance 1475s Trailer

Question:

Hello I have a 2018 Lance 1475s s=slide with a Flexco Single Step. We want to replace this with a double step if possible. Aluminum if possible but black is ok as well. 1. The mounting bolts are 4 inches apart. 2. The step itself is 24inch wide We want to find a double step to fit in the original mounting bracket with the the mounting bolts that are 4 inches. This camper sits low. Can you make some suggestions? I am attaching photos for your review. Thank you

1

Helpful Expert Reply:

The only possible double step upgrade option we have for a 2018 Lance 1475s is the Flexco Manual Pull-Out Steps for RVs part # SMFP-2100. It looks like the only dimensions that won't match up is the mounting flange bolt spacing which is larger on this double so you will need to drill a few holes is all.

To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 3" to 9" to account for the drop from the bottom steps to the ground. This measurement will also tell you how many steps you need. The above step measures 13" from the top of the flange to the bottom of the last step.

Recommended 2-Step Upgrade for 2018 Lance 1475s Trailer
Recommended 2-Step Upgrade for 2018 Lance 1475s Trailer
(click to enlarge)
Recommended 2-Step Upgrade for 2018 Lance 1475s Trailer
Recommended 2-Step Upgrade for 2018 Lance 1475s Trailer
(click to enlarge)
Recommended 2-Step Upgrade for 2018 Lance 1475s Trailer
Recommended 2-Step Upgrade for 2018 Lance 1475s Trailer
(click to enlarge)
Recommended 2-Step Upgrade for 2018 Lance 1475s Trailer
Recommended 2-Step Upgrade for 2018 Lance 1475s Trailer
(click to enlarge)
helpful expert reply by:
1
Conner L

Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>