Parts Needed to Tow a Trailer with a 2022 Hyundai Palisade

Expert Reply:

The Curt Trailer Hitch Receiver # C13427 is a great option for a hitch on your 2022 Hyundai Palisade. In addition to the hitch you are going to want at least a wiring harness and ball mount. The T-One Vehicle Wiring Harness # 118784 is going to be a great option for a wiring harness that will quickly and easily install a 4-way trailer connector on your Hyundai Palisade. The T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side interior trim panel in your rear cargo area.

The etrailer Ball Mount Kit # 989900 is going to be a great kit that will provide you with 2 different ball mounts, 2 different hitch balls, 2 pin and clips and a storage bag.

If your trailer has brakes you will want to get a brake controller like the Curt Echo Wireless Trailer Brake Controller # C51180 and the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation # ETBC7L. The # ETBC7L will use the 4-way flat as well as the included wires and hardware in the kit to provide a 7-way connector and necessary parts needed to operate the Curt Echo brake controller. You will also want to pick up a No-Drill Bracket # C57202, which will give you a mounting point for the 7-way bracket included in the # ETBC7L kit. The Curt Echo Brake Controller is a Bluetooth-enabled brake controller that wirelessly connects to your smartphone, turning your phone into a brake control interface. So you will not have to mount a bulky brake controller inside of your Palisade.

expert reply by: Scott S

0