Trailer Hitch for 2008 Toyota Highlander that Allows Use of Full Size Spare

Question

Question:

e98901 fit 2008 highlander with 19 in spare

asked by: Mike S

0

Expert Reply:

For your 2008 Toyota Highlander we have an etrailer hitch that is a confirmed fit that allows you to keep your full size spare with the part # e98858 but the # e98901 that you referenced was designed for a different vehicle so it would not work for you.

expert reply by: Jameson C

0

Answer 1

Other than the fact that the Curt #13534 uses a gloss powder coat finish and the etrailer.com brand #e98858 hitch uses a matte finish powder coat, there's no difference between the two hitches. Curt manufactures the etrailer.com brand hitches for…

view full answer...

Answer 2

I would be happy to help you. I have a hitch for you but Draw-Tite's parent company is being bought out (3/07/2023) so their inventory is low or nonexistent which explains why you can't find that hitch. Instead you will want the etrailer…

view full answer...

Answer 3

The etrailer brand #e98858 Class III hitch is indeed a fit for all models of the 2013 Toyota Highlander. There aren't any fit exclusions. According to the installation instructions which I've linked for you, the passenger and driver's…

view full answer...

Answer 4

Both the Curt Trailer Hitch, #13534, and the Draw-Tite Hitch, #75726 for a 2008 Toyota Highlander will install in very much the same way. I have included installation instructions for both hitches below for comparison. I have also included video…

view full answer...

Answer 5

For your 2009 Toyota Highlander there will be a few modifications to the rear panels at the rear of vehicle. When you install the Curt hitch part #13534 you will need to remove the tow hooks and you would either need to modify the panels under the…

view full answer...

Answer 6

Yes, your full-size 19 inch spare tire will be able to remain in place, and the etrailer hitch will indeed fit your 2013 Toyota Highlander with that size spare. The correct part number for your Highlander is the following: - etrailer Trailer Hitch…

view full answer...

Answer 7

The carrier I recommend is the etrailer, part #e98873, because it's lightweight but still has a 500 pound capacity. This makes it easier to mount into a trailer hitch and also takes up less of the vehicle's available tongue weight as well.…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Trailer Hitch for 2008 Toyota Highlander that Allows Use of Full Size Spare

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching