Will the AMPLock Trailer Hitch Receiver Lock for 2" Hitch Work On a Toyota Tacoma

Question

Question:

3rd gen tacoma OEM hitches require a pin span of exactly 2-13/16. Can you verify this products span? Could you try it on a Tacoma? Thanks.

asked by: Stephen

0

Expert Reply:

I don't have a way to verify fit of the AMPLock Trailer Hitch Receiver Lock part # AMP37FR on a 2020 Toyota Tacoma but we can offer you this same pin with a longer usable span, the AMPLock Trailer Hitch Receiver Lock for 2-1/2" or 3" Hitch part # AMP97FR which will work fine on a 2" hitch as well.

expert reply by: Conner L

0

Answer 1

Thank you for the photo, and it is a good idea to verify what you have, which I can confirm for you is a 2 inch trailer hitch receiver. For a hitch lock, I highly recommend going with a stainless steel lock as it will prevent rust and corrosion, and…

view full answer...

Answer 2

AMPLock products like the #AMP37FR are made in Canada. Their headquarters is in Drummondville Quebec Canada.

view full answer...

Answer 3

The AMPLock #AMP37FR is designed to fit on 2" receivers, so it will work on your 2020 Ford F-150's factory receiver. This hitch pin has a 2-13/16" span.

view full answer...

Answer 4

The Curt Trailer Hitch Receiver Lock #C23519 that you referenced is similar to a standard hitch pin that you would use for a weight distribution system. To ensure that this is compatible for your application I have attached a photo showing that the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hi Mario, Your Lippert Trailer Axle V000163950 uses part #L68149 for the inner bearing, part #L44649 for the outer bearing, and grease seal #58846. For the brake assemblies you can use the etrailer Electric Trailer Brakes #AKEBRK-35 or the…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hi Autumn; the correct Base Rails for your 2025 Ram 1500 with the 5-1/2' bed are the #TH24RV. These are the same base rails that come with the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH57RV.

view full answer...

Will the AMPLock Trailer Hitch Receiver Lock for 2" Hitch Work On a Toyota Tacoma

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching