What Hitch and Wiring Harness Will Fit 2013 Ford Focus Towing a Trailer With 2 Motorcycles  

The Brophy Drawbar part #BR39FR could be used in a Class I hitch but typically Class I hitches require a specific ball mount be used so I'd check with the manufacturer of your trailer hitch.

We have everything you need so that your 2014 Ford Focus can tow a trailer. For a hitch I would recommend the Curt part #C11158 as it has been confirmed to fit your vehicle. You will need ball mount number 3593. I attached an install video for you…

It sounds like you are referring to the square hole spacers that are included with trailer hitches like the Draw-Tite Class III #75740 for your 2003 Ford F-150. If this is not what you mean please let me know. The included spacers are required when…

I attached a picture that has all of the dimensions of the Bushing part #58184, but the overall height of it is 1/2 inch. You would not need to use two of these bushings.

You could use Roadmaster Quiet Hitch #RM-061-125 upside down but I don't think it is going to fit based on your pictures. Something smaller like Item #F-315 that goes into the shank of the accessory you are inserting into the hitch will…

The Curt trailer hitch #C11158 fits all models of the 2013 Ford Focus hatchback except for the ST models. So it does fit your Titanium model! If you want to use the hitch for an accessory such as a bike rack or cargo carrier, then you have to make…

Currently our Curt Drawbar #C45028 has the most rise available for a 1-1/4" Class I receiver like that you would have on your 2015 Chrysler 200. The rise is 5-3/8" from the receiver. To get slightly closer to your 6" rise…

For a 10 inch rise on a 1-1/4 receiver, you would need to use an adapter like you stated. This will reduce the tongue weight capacity of your hitch receiver by 50% because you are using an adapter which puts more leverage on the hitch receiver. I…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…