Replacement Tower for Yakima OverHaul HD Truck Bed Ladder Racks - Passenger Rear or Driver Front

Question

Question:

Hello eTrailer care team, Would a Replacement Tower for Yakima OverHaul HD Truck Bed Ladder Racks be available for the Passenger Rear or Driver Front for a 2009 Toyota Tacoma? Thank you in advance.

asked by: J

0

Expert Reply:

The replacement tower for the driver front or passenger rear is Replacement Tower for Yakima OverHaul HD Truck Bed Ladder Racks - Driver Front or Passenger Rear # Y47TR.

expert reply by: Thomas M

0

Answer 1

Yep, the mounting bases are exactly the same for the OverHaul HD and OutPost HD ladder racks. The OverHaul HD towers are the following part numbers: - Replacement Tower for Yakima OverHaul HD - Driver Front or Passenger Rear #Y47TR - Replacement…

view full answer...

Answer 2

To do a half roof rack for the roof of your 2023 Ford F-350 you'd need the following: Yakima JetStream Crossbar part #8880650 BaseLine Towers for Yakima Crossbars part #Y62TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part #Y06185…

view full answer...

Answer 3

The Yakima Keel Overs, part #Y04069 can fit bars up to 3-1/2 inches tall by 3-1/2 inches wide, so they will fit onto the Rhino Rack HD bars that measure 1-5/8 inches wide by 1-7/8 inches tall.

view full answer...

Answer 4

Yes, we do offer half roof rack systems for a 2010 Ford F-250. I recommend the JetStream which has an aero shape and integrated slots for use with channel accessories. I have attached the parts you will need for this below. Yakima JetStream Crossbar…

view full answer...

Answer 5

You really could use either one of the 68" #Y01158 or 78" #Y01159 bars, but I have a feeling that the 78" bars are going to stick out a little bit too far, so I do recommend going with the 68" Yakima HD Bars #Y01158. Obviously…

view full answer...

Answer 6

While we do not have a full kit for just one crossbar for your 2020 Ford F-250, I have compiled a list of the individual part numbers that make up the Yakima HD crossbars that are compatible with the SuperCab and CrewCab. For the crossbar itself, use…

view full answer...

Answer 7

I might have a solution for you, but the Yakima Bedrock HD System #Y01160-58 are only compatible with the Yakima HD bars like the #Y01157. The Yakima Bedrock HD, Overhaul HD #Y01151-58 and Outpost HD #Y01152-58 systems are all only compatible with…

view full answer...

Answer 8

I checked directly with Yakima, and the shortest crossbar size for the OverHaul HD ladder rack on a 2021 Ford F-150 is indeed the 68 inch bars, and they say the 60 inch bars will not fit as they are too short. So the correct fit for your '21…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hi Dennis; you aren't going to find information on the static load listed from the roof rack manufacturers. Our general guidelines for tents like the #Y79XR are that the roof rack must have a minimum load capacity of 165 lbs which this rack does…

view full answer...

Answer 12

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Replacement Tower for Yakima OverHaul HD Truck Bed Ladder Racks - Passenger Rear or Driver Front

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching