Recommended Cover For A Fan-Tastic Vent On A 2002 Dodge Roadtrec Versatile

Question

Question:

Dometic has sent me the wrong vent cover twice. The first one was flat instead of bubble. The second one had the arm on the wrong side. How do I order the proper vent cover for a Fantastic Fan on an 02 Roadtrek Versatile? I cant find a model/part number as the old cover is not available to look on. And I cant find a model number on the vent. Thanks for your assistance. Photo would not upload.

asked by: Dori M

0

Expert Reply:

Without a model # for your Fan-Tastic Fan there's no way to 100% confirm the fit but I can confirm that the replacement domes we do carry # FVK1020-19 (smoke) and # FVK1020-81 (white) will fit the following models: FV801200, FV801208, FV801250, FV807350, FV802250, FV803350, and FV800900.

You could also just go with the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover - 23" x 19.5" x 10.25" - Black # DMC38FR which will go over the vent with no need to worry about the normal cover. This cover encloses your RV roof vent so that you can safely open the vent at any time. It lets light and air in while keeping the elements out and allows you to leave your vent open while driving. The wing-shaped louvers allow maximum airflow through the removable grille better than standard flat louvers.

expert reply by: Kevin C

0

Answer 1

The Replacement Dome for Fan-Tastic Vent RV Roof Vents - Tinted #FVK1020-19 is a fit for your Fantastic Vents 4000 series vent. The vent is the standard 14-1/4 by 14-1/4 inch and this cover is made to fit that standard size. You will simply need to…

view full answer...

Answer 2

By "slider track" I believe you are referencing the hinge; if you take a look at the accompanying photo you should be able to see what I am talking about. That should be what your Fan-Tastic vent has and since your model…

view full answer...

Answer 3

I reached out to my contact at Lippert and he did verify that the Replacement Motor #LC369506 you purchased will not work with your existing Kwikee Triple Step assembly and unfortunately there's not a separate component that will allow it to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Recommended Cover For A Fan-Tastic Vent On A 2002 Dodge Roadtrec Versatile

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching