Trailer Wiring Fit For 2022 Nissan Frontier

Question

Question:

Got a new 2022 Nissan Frontier. Need to install wiring to pull a trailer. Looking underneath I see two places plug wiring into. What do I need? Do I need to do something behind the front right kick panel? Have a tow button on the dash. Thanks, James

asked by: James T

1

Helpful Expert Reply:

So you will need to access the 12 pin jumper plug in your Frontier's cab, which as you said is on the passenger’s side behind the kick panel. This is where you will install the harness and relays that activate the trailer tow package, and the correct harness for your 2022 Nissan Frontier, that does have those relays, is from Curt:

- Curt Wiring Harness with 4-Pole Flat Trailer Connector # C56225

Then, to finish the install of the # C56225, underneath your Frontier there are two places to plug the wiring in, but what you will do is just plug into the gray 6-pin connector.

expert reply by: Kyle S

1

Answer 1

Absolutely, the three relays attach to the jumper harness that installs behind the passenger side kick panel. The large brown relay provides 12v power to the trailer connector at the rear bumper. It looks like you purchased the 4-pole harness,…

view full answer...

Answer 2

I recommend the SumoSprings Solo Custom Helper Springs part #SSR-117-47 instead of part #SSR-117-40 for your 2019 Ford F-150. In regards to the SumoSprings, you will always want to have a safety margin and the above will be perfect for your setup.…

view full answer...

Answer 3

That you have the Curt Wiring Harness with 4-Pole Flat Trailer Connector, #C56225, is the first needed step. If you have not already installed this, please note the linked installation video below for assistance. The next item needed is the Universal…

view full answer...

Answer 4

For your 2022 Nissan Frontier, I recommend Wiring Harness #C56225. As far as a hitch goes we do have a few options for your truck, however, I recommend one of best sellers, the etrailer Trailer Hitch Receiver #e98869. This is a custom made class III…

view full answer...

Answer 5

The 3 connectors on the #C56225 are where the 3 relays included with the wiring harness would plug in. The relays are necessary to activate the right/left turn signals and the running light circuits for the trailer connector.

view full answer...

Answer 6

I checked with our vendors and the only option to purchase the relay you need for your 2022 Nissan Frontier is to get the Curt T-Connector Vehicle Wiring Harness item #C56225. This includes the necessary relays that Nissan leaves out when building…

view full answer...

Answer 7

The 4-Way connector just press fits into the bracket and keeps the connector secure. There are small ribs on the connector that help hold it in the bracket. The cap also goes around the connector to help secure the 4-way just in case it gets knocked…

view full answer...

Answer 8

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver item #75282 is a confirmed fit for your 2022 Nissan Frontier. It has a maximum gross trailer weight of 5,000 lbs and a maximum tongue weight of 750 lbs. I have attached an installation video and…

view full answer...

Answer 9

We can get your 2022 Nissan Frontier without the factory tow package set up with a 7-way and brake controller, and for the 7-way there is one part that is needed, though it will not be factory style, it will be a 7-way that you plug in and will…

view full answer...

Answer 10

In order to find the correct replacement hubs for your EZ Loader boat trailer you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped…

view full answer...

Answer 11

Yes, we do have a custom fit truck bed mat for your 2022 Nissan Frontier with the DeeZee Custom-Fit Truck Bed Mat #DZ86965. This is made of a heavyweight Nyracord which is essentially a super durable rubber construction that resist the elements as…

view full answer...

Answer 12

I recommend the etrailer Trailer Hitch Receiver #e98869 for your 2023 Nissan Frontier. This receiver is custom fit and has a matte black finish for a factory appearance. There is a tab welded on the receiver that will accept the 4-way Mounting…

view full answer...

Trailer Wiring Fit For 2022 Nissan Frontier

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching