What Trailer Hitch Fits 2021 Acura RDX A-Spec

Question

Question:

Can you please confirm the trailer hitch receiver that fits my 2021 Acura RDX A-Spec? Is there one?

asked by: Byron

0

Expert Reply:

We do have a trailer hitch receiver that fits your 2021 Acura RDX A-Spec, from Draw-Tite, and I verified this fit for you with the manufacturer; the correct part number is the following:

- Draw-Tite Max-Frame Trailer Hitch Receiver # 76268

The # 76268 is a complete bolt-on installation that won't require any type of drilling into your Acura's frame or any type of fascia or bumper trimming either.

expert reply by: Kyle S

0

Answer 1

I have a solution for you. While the Curt Class 3 Trailer Hitch Receiver for 2" Hitches #C95CR will fit your 2020 Acura RDX, it will be more exposed than your factory hitch you have installed now on your vehicle. Unfortunately, there are no…

view full answer...

Answer 2

For your 2021 Acura RDX, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit #76268. The Draw-Tite comes with the largest tongue weight and tow weight capacity available that is offered out of any hitch (350 tongue and 3,500 tow).…

view full answer...

Answer 3

While there won't be a difference in terms of corrosion resistance between the Curt Trailer Hitch Receiver #C95CR and Draw-Tite Max-Frame Trailer Hitch Receiver #76268 for your 2021 Acura RDX, I recommend the latter, the Draw-Tite #76268. The…

view full answer...

Answer 4

When installing the Draw-Tite Trailer Hitch Receiver #76268 on your 2020 Acura RDX you will remove the rubber isolator from the silver prongs (hanger) with either exhaust removal pliers or a simple pry bar. I have added a link to the instructions for…

view full answer...

Answer 5

The crossbar of the Curt 13423, which we refer to as part #C95CR is exposed, just like the Draw-Tite #76268 would be. I've linked to a photo showing what the Draw-Tite 76268 hitch looks like once installed, the Curt #C95CR would look almost…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

What Trailer Hitch Fits 2021 Acura RDX A-Spec

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching