bing tracking image
Q & A Icon

Parts Needed To Install A Brake Controller On A 2020 Jayco Alante Motorhome

Question:

I have a 2020 Jayco Alante that I will be towing an enclosed trailer with. I has tandem axles and electric brakes on both axles. My Alante didn't come with a brake controller and need to get one hooked up so I can tow the trailer. I already have a hitch on the RV and an adjustable ball mount from my truck I used to pull the trailer with so I'm good on that part. It doesn't look like there was a wire connector for the 7 way plug on the trailer to go into so I guess I need everything for the electrical stuff. I also had the Curt Assure brake controller in my truck, so I would like to be able to hook that up if possible.

0

Expert Reply:

You are definitely in luck! We have just what you need to get your Curt Assure # C49UR brake controller installed in your 2020 Jayco Alante. There is actually a port under your dash that will let you use the Custom Wiring Adapter # C51322 to plug directly into. This is a very quick and easy install and you will just need to figure out where you want to mount the controller.

Adding the 7 Way to get everything working will be a little more involved, but by no means difficult. Your Jayco has all the wires run to accomplish this feat, so it is just a matter of getting the wires connected to a 7 Way. The Hopkins # HM40975-11998 has all the butt connectors to do this as well as the bracket to get it mounted. This will have both a 7 Way port and 4 Flat port if ever needed. It is also the same design used on most trucks nowadays and is very rugged. Once this is hooked up, you are good to go.

expert reply by:
0
Lazer S

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>