Question:
Need bearings inners and outers along with dust seals have been unable to match races and seals also spindle part numbers Vin 103731
asked by: Darren B
Expert Reply:
In order to recommend replacement bearings, I will need either the reference numbers from your existing bearings or an accurate measurement of the spindle surfaces where the inner and outer bearings ride and the surface where the grease seal rides (see diagram). The measurements need to be as accurate as possible using a digital caliper. Using a tape measure or ruler will not be precise enough.
If you can provide this information, I would be happy to look for replacement bearings.
Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
